JV PatchEd. – Roland JV-880 Patch Editor

JV PatchEd.
Patch Editor for Roland JV-80 / JV-880

Windows and Mac standalone Patch Editor for Roland JV-880

Patch Editor for Roland JV-80 and JV-880 synthesizers.

With this panel you will have a complete control of all Patch Configurations Parameters  on Roland JV-880 and you will really can explore the power of this fantastic synth. 

Tone 1 to 4 Wave Set, LFO1  and LFO2, TVA, TVF, Pitch, Modulators, Expansion Boards, Common, Reverb and Chorus parameters will be managed from a single instance with support to expansion cards from series SR-JV80 and PCM-SO1.

All editions will work on Temporary Patch.

For start point, just select a patch from Factory Patch List and then use this patch as your start reference. All the parameters of patch will be imported by JV PacthEd. 

At the end of edition, if you desire, you can store a new patch on Internal User bank of JV-880, on Data Card or on your computer as a sysex file. 

The selected user patch position patch o JV-80/880 will be overwrited!

Any feedback will be welcome. I Hope you enjoy!

JV PatchEd. for Windows Users:

JV PatchEd. for Mac Users:

JV PatchEd. for JV-90  and JV-1000 Windows Users:

This work was useful for you? This software is free but maybe, you can donate for it!

__________________________________________________________________________________

Version History

JV PatchEd. Version 1.75 

  • Bug corretion on “Wave Selection” when expansion board SR-JV80 are present.
  • SR-JV80 selection board now are present. No more tabs for select waves of expansion.
  • Bug correction on wave list of SR-JV80-01 – POP
  • Bug correction on wave list of SR-JV80-09 – Session
  • Added wave list from SR-JV80-13 – Vocal
  • Added wave list from SR-JV80-14 – Asia

JV PatchEd. Version 1.76

  • Added wave list from SR-JV80-15 – Special EFX
  • Added wave list from SR-JV80-16 – Orchestral II
  • Added wave list from SR-JV80-17 – Country
  • Added wave list from SR-JV80-18 – World Collection Latin
  • Added wave list from SR-JV80-19 – House Collection
  • Added a section “Get Patch From JV” with auto-request patch data

JV PatchEd. Version 1.77 (02/03/2020)
 

  • Added function “Tone Copy”
  • Added function “Auto Request Data” when panel is loading
  • Minor interface modifications

 JV PatchEd. Version 1.78 (12/03/2020)
 

  • First version for Mac Users – Thanks to cowudders!
  • Added function “Tone Init”
  • Minor bug corrections
  • Exported with Ctrlr Stable Version – 5.3.201

JV PatchEd. Version 1.79 (24/03/2020)
 

  • Bug corretions on “Auto Request Data” on initialization of Panel
  • Some Init definitions
  • Minor graphical interface corrections

JV PatchEd. Version 1.80 (28/04/2020)
 

  • Added Store Function to save patch on Roland JV-880 or Data Card
  • Added Wave Lists to Suport to PCM-SO1 Series
  • New organization of Factory Patch Lists
  • More intuitive Wave Selection with dynamic list of waves
  • Ckecksum corrections on “Get Temp Patch Data”
  • Little graphical corrections on design

 JV PatchEd. Version 1.81 (30/05/2020)
 

  • Graphical User Interface changes for better experience
  • Added Output mode  selection
  • Bug corrections on Wave and Wave Group Modulators
  • Bug corrections on Copy Function
  • Bug corrections on JV PatchEd Initialization

 JV PatchEd. Version 1.82 (13/07/2020)

  • Added question before “Init” function to prevent acidental “Init” click
  • Modifications on functions “Init’ and “Copy” to prevent a Midi Overflow in specific devices
  • Name indication of “Random Pan” on position +64 on Pan knob
  • Possibility to save patches on computer as sysex file
  • New version for Mac Users. Thanks to cowudders!

JV PatchEd. Version 1.83 (24/07/2020)

  • Correction on “Internal” Wave List – Added wave name “REV Crash 1”
  • Added function Load Sysex from computer
  • New Darker Layout to better experience for eyes
  • New version for Mac Users. Thanks to cowudders!

JV PatchEd. Version 1.84 (31/08/2020)

  • Bug corretion at Tone 3 – TVF – Key Follow Cutoff – Missed Button 
  • Added a Tab Control with a XY Surface – Cutoff x Resonance

JV PatchEd. Version 1.85 (08/12/2020)

  • Bug corretion at Internal Wave List – Missed wave: Synth Saw 2

MeeBlip Triode MIDI Editor – VST/AU And Stand-alone

MIDI Editor for the MeeBlip Triode

Avaliable for:

  • Mac as Standalone, AU and VST plugins
  • PC: Standalove, VST 64 and 32 bits

This MIDI Editor allows you to control all parameters of the MeeBlip Triode, including some “hidden” parameter which is not available on the synth panel.

Plugin versions allows automation/recording of the different parameters

You can download the free editor here: https://www.autodafe.net/midi-editors/meeblip-triode-midi-editor.html

MIDI Widget 1.0 VST

MIDI Widget 1.0 VST

Created by dnaldoog and myself, this VST is primarily designed to route MIDI out of DAWs where MIDI generating devices are sandboxed (such as Propellerhead Reason). The Widget will route MIDI to and from both virtual and physical devices and back into your DAW via the IAC Driver, MIDI Ox or similar loop MIDI method.

I use the Widget with a VST host such as Minihost Modular (image above) this allows me to chain the Widget behind a VST sequencer; the resulting MIDI is then routed out to physical synthesisers.

Included in this zip download are a Ctrlr Panel, 64 bit Mac OSX VST, 32 bit Windows 10 VST and 64 bit Windows 10VST.

This panel has been created using Ctrlr version 5.3.0

MIDI Widget Download
https://www.dropbox.com/s/a8omjd73rni83qy/MIDI%20Widget%201.0.zip?dl=0

Minihost Modular Link
https://www.image-line.com/documents/news.php?tag=minihost+modular

Meeblip Geode panel

Meeblip Geode midi controller panel

Basic panel with all supported CC Messages.

Restrictions:

  • Panel is not updated if changing parameters on device (no cc values sent from device)
  • Control of volume and filter resonance not possible (not supported by device)

Downloads:

Version 1.0
Meeblip-Geode_1_0.bpanelz   333

Elektron Model Samples Editor Controller, VST and Standalone

Elektron Model Samples Editor Controller, VST and Standalone

Elektron Model Samples Editor Controller, VST and Standalone

This Editor for the Elektron “Model Samples” facilitates the sound adjustment of the 6 Tracks.

 

– You have direct access to all parameters.

– The hidden parameters for LFO and FX are easy to use.

– All Patterns can also be selected directly.

– Additionally there is a solo function for the 6 Tracks.

– With the X-Y Pads all parameters can be controlled, but they are especially suitable as Faders between the tracks.

– The Editor is perfect for integrating model samples into the DAW.

– All parameters can be automated and saved with the DAW project.

– The Elektron Model Sampler Editor is available for PC (32/64 bit) as standalone and VST and for MAC (64 bit) as

  standalone, VST and AU.

 

Home: https://elektron-model-samples-editor.jimdofree.com

Video: https://www.youtube.com/watch?v=rcnWXN7ONDc

ROLAND BOUTIQUE JU-06A “MIDI EDITOR AND CONTROLLER, VST AND STANDALONE

ROLAND BOUTIQUE JU-06A "MIDI EDITOR AND CONTROLLER, VST AND STANDALONE

ROLAND BOUTIQUE JU-06A "MIDI EDITOR AND CONTROLLER, VST AND STANDALONE

Here is my new Midi Editor and Controller for the Synthesizer Roland Boutique JU-06A.

The Roland JU-06A is a very powerful boutique version of the JU-60 and JU-106 synthesizers. 

Editor Features:

– Complex sound changes

– Direct access to many sound parameters

– X-Y modulation of all parameters

– The editor settings can be saved in the DAW with the project or saved as Plugin Preset (.fxp) and loaded again.

– You can select the sound off the JU-06A (Presets 0-64).

The editor is available for PC as VST / Standalone 32/64 bit, and for MAC as VST / AU / Standalone 64 bit.

 

Home: https://ju-06remote.jimdo.com

Video: https://www.youtube.com/watch?v=mURE0X7w6FQ

Korg Minilogue XD Editor and Controller, VST and Standalone

Korg Minilogue XD Editor and Controller, VST and Standalone

Korg Minilogue XD Editor and Controller, VST and Standalone

The „Minilogue XD Editor / Controller„ is the first VST and Standalone  controller for the  Korg Synthesizer Minilogue XD “

 

– It is perfect to integrate the “Minilogue XD” into your DAW.

– It makes the sound design easier, because you have direct access to the parameters.

– The „Minilogue XD” Parameters can be automated and they can be stored with your

DAW Project.

– You can safe your new sound on the “Minilogue XD”  and the editor settings as VST

Presets (..fxp) in the DAW.

– With the X-Y-Pads, all Parameter can be selected and controlled.

 

– It is possible as VST and Standalone for PC 32/64 Bit and Mac (64 Bit) as VST, AU and

Standalone.

 

Home: https://korg-minilogue-xd-editor.jimdofree.com

Video: https://www.youtube.com/watch?v=WSFz5iV8G6s

Roland GAIA SH-01 Sound Editor and midi Controller, VST and Standalone

The GAIA SH-01 Sound Editor and midi Controller facilitates the sound adjustment in the Roland Gaia SH-01 synthesizer.

With the editor it is possible to exploit the great sound potential of the synth.

It is also possible to automate the controls in the VST version of the editor in the DAW.

 

Features:

– Complex sound changes

– Direct access to all 3 Tone Layers

– Extensive arpeggio control

– x-y modulation of the controllers, across tone layers

– Access to many hidden parameters

– The editor settings can be saved in the DAW with the project or saved as Plugin Preset (.fxp) and loaded again.

 

The editor is available for PC as VST / Standalone 32/64bit, and for MAC as VST / AU / Standalone 64 bit.

 

Home: https://roland-gaia-sh-01-sound-editor.jimdofree.com

Video: https://www.youtube.com/watch?v=LLNKXRCuFQk

 

Jomox AirBase 99

Jomox AirBase99 Midi Controller

Basic panel with all the features supported with Airbase99 firmware 1.15.

Airbase99 settings for full funtionality:

  • Under MIDI Menu (Master Menu parameter PLAY must be off to access MIDI menu):

    setting: SnpSh ON (send program dump on startup and programchange events)
    setting: TxCtr ON (send controller values when changing values on device)

Restrictions:

  • Bank changes do not change the program, a program change needs to be executed with a bank change.(since fw 1.15)
  • To select the Kits # 128-255 in Bank 000 – 003, send the bank select in advance by using the values 1, 3,
    5 or 7. These uneven controller values address memory slots 128 – 255 of the desired bank. The values 0, 2, 4 and 6 correspond to the lower half of the specific bank.
    An example: Bank 000 Kit 200 is selected by using Bank Select = 1 and Prog Change = 73 (200 – 127 = 73)
  • When changing a program a programdump with all the controller values is sent to the panel. But the following controls are not sent and therefore not updated:
    -for handclap, rimshot,crash, ride, hihat: the sample selection.
    -for hihat: the source selection.
    These controls are not in sync with your device after a program change.
  • Button “Save on device” just sends the store cc (CC=62 value=64) value to the Airbase99.

Downloads

Version: 0.5
Jomox_Airbase99-0_5.bpanelz  downloads: 734

Novation X-Station Voice Editor

Here is Novation X-Station voice editor / librarian.

What can it do:

  • Send / receive almost all the parameters via SysEx / MIDI CC messages
  • Save / Load MIDI Bulk SysEx dump files to / from X-Station
  • Save / Load single programs  as *.syx files
  • Receiving MIDI bulk dumps directly from device

This panel have some limitations – for example after “offline” parameters edited, entire patch data is sending via sysex because X-Station not able to control these parameters in realtime.

Current version: 0.4.3 from 14.10.2019

Hope controlling your X-Station with this panel will be fun!





Ctrlr