Hello,
As the MKS70 panel unfortunately won’t load on my machine, I’ve embarked on building a panel for it. All was working fine, until I decided using UICombos to control the RANGE, WAVEFORM, and other types of parameters that have a limited set of values.
As I said, the right SYSEX is being sent to the synth if using a uiSlider. But things become very different if it is a uiCombo. It does however work randomly.
Here are 2 sysex outputs for the 4 values of the DCO-2 range of the MKS70. The DCO range can be set to either: 16′,8′,4′,2′ and expects difference in values of 31 for each step.
The first one is a working output from the same uiCombo.
DCO-2 RANGE - working
f0 41 36 00 24 20 01 10 02 4d f7
f0 41 36 00 24 20 01 10 55 7a f7
f0 41 36 00 24 20 01 10 03 4c f7
f0 41 36 00 24 20 01 10 7f 50 f7
DCO-2 RANGE - <strong>NOT</strong> working
f0 41 36 00 24 20 01 10 00 4f f7
f0 41 36 00 24 20 01 10 01 4e f7
f0 41 36 00 24 20 01 10 02 4d f7
f0 41 36 00 24 20 01 10 03 4c f7
It either starts not working after sliding the component in a group, or after changing the colors, or after re-opening the panel….
I tried increasing the max-Value of the component to 127, thinking that could be the culprit, but to no avail…
I attached the current state of the panel in case someone sees what is wrong.
Am I trying to do something impossible? and what am I doing wrong with programming the panel?
Attachments:
You must be
logged in to view attached files.
http://opuswerk.tumblr.com
www.soundcloud.com/opuswerk
www.facebook.com/opuswerk