Need help even getting started

Home Forums General Using Ctrlr Need help even getting started

This topic contains 1 reply, has 2 voices, and was last updated by Possemo Possemo 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #87411

    • Topics: 1
    • Replies: 0
    • Total: 1

    I have been trying to get started making a Ctrlr for the TE OP-Z but I can’t even get the basics to work.

    I used the Midi Monitor to establish that turning one of the encoder dials sends CC messages on a particular channel and with a particular controller number.

    Then, I added a control in Ctrlr and set the MIDI channel to that channel with “override panel channel” and with that controller number, with CC messages.

    But the controller does not update when the CC messages are sent and according to the output monitor, turning the controller does not send any messages either.

    Is there something else I have to do to make it actually engage?

    • Topics: 13
    • Replies: 530
    • Total: 543
    • ★★★

    Maybe attach the panel here then I could have a look. You don’t need to set “override panel channel”, just set the right channel in the midi settings. This way tha controller will work with any channel.

    In order to get a slider working you have to switch “panel mode” so that you don’t see the edit panel at the right.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

There is currently 4 users and 30 guests online
ofsvermitimar, bullverbanggidig, aditenurasprog, cowudders
Forum Statistics
Threads: 2,206, Posts: 15,554, Members: 57,959
Most users ever online was 12 on January 22, 2019 3:47 pm
Do NOT follow this link or you will be banned from the site!