Home Forums General Panels, Components, Macros roland vp9000 panel

This topic contains 6 replies, has 2 voices, and was last updated by zeoka zeoka 3 years, 6 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #20124
    zeoka
    zeoka
    Participant

    Hi
    for info
    i start a panel for this sampler
    the midi spec is very complete and the device receives sysex very efficiently
    it is very specific for the way pitch ,time , formant are controlled : like a midi controller
    if you’re interested stay tuned

    Attachments:
    You must be logged in to view attached files.
    #20139
    jasefos
    jasefos
    Participant

    I used to have a VP9000 … [weeps]

    --> Music: www.soundcloud.com/jasefos
    --> DAW: OSX10.10.5 with Live 9.6 x64, UA Apollo Quad
    --> Controllers: Push 2, KeyLab61, Maschine mk2, MCU Pro, 2xMCU-Ext
    --> Synths: Cyclone Bass Bot TT303, ESQ1, MKS80/MPG80, Matrix 6R, Matrix1000, Mopho, 05RW, DW8000, Virus TI Polar, Voyager Electric Blue, MiniBrute, AN1X, K5000s, FIZMO, ASR10 rack, Kenton ProSolo (controls Sequential Pro-One, Yamaha CS15), Prophecy, EMX1, MonoTribe, SP1200, DX100, KARP Odyssey

    #20140
    zeoka
    zeoka
    Participant

    I would like to have another units !!

    I have already an issue with Ctrlr , a channelize problem :
    when the vp sends b0 10 xx my two mods (b0 10 xx and b1 10 xx) receive the data in same time and move together and after they send only b0 10 xx ! I must re-assign the midi ch to second knob

    same thing in the other way : I send b0 10 xx and b1 10 xx and the vp receives for all virtual knobs
    edit:
    when the vp sends b1 ,after the ctrlr knobs sends all b1
    when the vp sends b2 ,after the ctrlr knobs sends all b2 etc..
    but in the property knob editor the midi channel stays unchanged
    the vp sends at different chnels b0 b1 b2…. one channel for each of six parts it
    transmit normally but like ctrlr it seems don’t take care of midi channel when it receives
    strange!
    ctrlr knob prop has “midi override chnl “option and it is set to off
    or may be the “running status” of the vp causes ctrlr change midi chnl prop of mods ??

    Any idea ?

    Attachments:
    You must be logged in to view attached files.
    #20177
    zeoka
    zeoka
    Participant

    Ok I get it ! disable the “Remote Kbd” on vp , disable the vp knobs too
    But my sampler was able to change midi prop of mods !
    So I continue . the fx section will be the more complex I will do
    My panel has the 3 vp knobs + the virtual knob per part , cool

    Attachments:
    You must be logged in to view attached files.
    #20229
    zeoka
    zeoka
    Participant

    Hi
    I implement currently color changes to mods when they are to default values but I do simple scripts for each mod (264 scripts)
    If any ctrlr programmer have a trick to reduce nb of scripts it is welcome !
    If I dispayed only one part I could do only 44 scripts but I display all parts
    my page contains 10 vp9000 pages so I prefer like this

    FEATURE REQUEST :
    possible to add a “snap to default value” option with “force” option too
    for modulator . that way we can have an “hardware sensation”
    good idea for other users ?

    Attachments:
    You must be logged in to view attached files.
    #20235
    jasefos
    jasefos
    Participant

    Hi Zeko regarding your snap to default value feature request … it’s already there – at the top of the Component properties for a modulator you will find “uiSliderDoubleClickEnabled” (make sure it’s ticked) and “uiSliderDoubleClickValue” (set it to your preferred default value).

    For the panels I’m making, my strategy is that by double clicking on all controls you end up with a good “Initial” patch.

    Wish I could help you with the other stuff but I’m just learning to build in CTRLR myself.

    Cheers

    JaseFOS

    --> Music: www.soundcloud.com/jasefos
    --> DAW: OSX10.10.5 with Live 9.6 x64, UA Apollo Quad
    --> Controllers: Push 2, KeyLab61, Maschine mk2, MCU Pro, 2xMCU-Ext
    --> Synths: Cyclone Bass Bot TT303, ESQ1, MKS80/MPG80, Matrix 6R, Matrix1000, Mopho, 05RW, DW8000, Virus TI Polar, Voyager Electric Blue, MiniBrute, AN1X, K5000s, FIZMO, ASR10 rack, Kenton ProSolo (controls Sequential Pro-One, Yamaha CS15), Prophecy, EMX1, MonoTribe, SP1200, DX100, KARP Odyssey

    #20250
    zeoka
    zeoka
    Participant

    thank you
    My request was not not have a default value ,as you said it is already there
    but a snap option like if the slider was serrated or like a magnet…

    • This reply was modified 3 years, 6 months ago by zeoka zeoka.
Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.

Comments are closed.