SIDSTATION CC

[funk313]

Hi

I just finished a controller for the SIDSTATION – its only cc at this stage since the newest revision 0s 1.11 r34 doesnt (for some reason) acknowledge sysex messages apart from the usual dump back and forth – ive requested the prewieves 1.11 r33 version from Elektron and will try and make a sysex version that will vastly expand the controller capabilities if they will be kind enough to send it to me in sysex form of some sorts .. cheers and happy knobbing ” title=”Smile” />

[funk313]

ok so i got the r.33 from the fine folks at Elektron – to be able to use sysex as direct program control you have to roll back to v. r33. ive uploaded the r.34. and r.33 version here http://www.mediafire.com/?t1u6ecjf5nq78v3 REMEMBER TO READ THE INSTRUCTIONS — at one point i effed it up, because I had to switch between r33 and r34- and the lights began flashing like a motherfkr which was a bit nerve wrecking..i somehow managed to force flashupgrade the little thing.. so be carefull when you do the downgrading!
If you’re still on the r.34 some of the controls will work (from old version) and the new ones won’t because it mapped to sysex..

OH I would REALLY REALL YLIKE to be able to do a WaveTable sequencde control – but its a bit more comnplicated then just punching in the sysex I think.. so if somebody out there has more knowledge on how to go about this ting please help out!
Cheers!
[img:1vsuoo4i]http://img213.imageshack.us/img213/7683/ctrlrstandalone.png[/img:1vsuoo4i][/url:1vsuoo4i]

Uploaded with ImageShack.us[/url:1vsuoo4i]

[alleyway61]

Just found your post and would love to get the controller running for my Sidstaion. Can i ask you to upload the programme files again as only the Elektron OS downgrade is working.

I’d really appreciate it!
Cheers

[Author]

Posts