QuickBooks Error 6000 83 – How to Resolve Network Setup

QuickBooks Error 6000 83

While opening a company file, you might have faced the QuickBooks error 6000 83. This issue is usually displayed in the -6000, XXXX format where the last four digits could be anything, based on the root cause. Whatever may be the cause, when this error shows up, your company file will not open until it is resolved.

The causes leading to the -6000 problem are quite varied. They range from an interfering Firewall and corrupted (.TLG) files to incorrect internet setups or file mismatch. These specific causes lead to separate codes for each one so that we can differentiate between them easily.

Mentioned below are the chief reasons behind the -6000 series of errors. If you have encountered error code 6000 83, keep reading this blog to learn of some solutions through which you can fix this problem. If not, then you can go through other blogs in which we have covered many issues like the QuickBooks error 6000 77.

Main Reasons for QuickBooks error 6000 83

The following are some of the ways in which you may end up with the -6000 series errors-

  • A firewall is disrupting the connection or port 8019 is hindered
  • The.TLG file or QuickBooks installation is corrupted
  • A non-server computer is hosting the company file
  • QB Database Server Manager is malfunctioning
  • .ND file is working improperly or has the wrong path to your company file
  • Incorrect network setup in QuickBooks or it could be that the company file is damaged
  • The Windows account being used is damaged

When you know the main reason behind the error in your computer, you can proceed towards solving it on your own. It is not difficult to fix once you know what’s causing it but we recommend two main steps before you move forward –

  • That you make sure your QB software is updated to the latest version. This prevents most of the problems from taking place.
  • If you install the QuickBooks File Doctor and run it – you might get your problem resolved beforehand and save a lot of time.

Based on what caused the particular trouble in your system, you can go ahead and perform the following solutions to solve it.

Related Post: QuickBooks Error 1402

Solutions to QuickBooks error 6000 83

Different causes of the problem mean different ways in which you can solve it. Here are some of the easiest solutions for it –

Solution 1: Replace the names of the.ND and.TLG files

The.ND and.TLG are configuration files that permit QuickBooks access to a company file. Any damage to these will result in the error message showing up. You can fix these files by renaming them using the following steps –

  • Click and open the location folder for your company file.
  • Find the files with the extensions .ND and .TLG and the same name as your company files.
  • Rename and add the word OLD at the end of all of them, such as company_file.qbw.nd.OLD
  • Try signing in to your company file again. If the issue persists, try the next solution.

Solution 2: Try opening a sample company file

This solution is to test whether the problem exists in the company file or the software itself. If your file opens, then you can move over to the next solution. However, if it doesn’t, then you have found the real problem behind QuickBooks error code 6000 83- damaged installation files. You shall have to repair those corrupted files.

Solution 3: Paste a copy of the QuickBooks file

This solution is to check whether the location of the file is causing trouble. All you have to do is copy it and paste it right on the desktop. If the location is, in fact, the problem, then clicking on it will open it normally. If not, then the file itself is most likely to be corrupted – you will have to fix it. You will now have to opt for the next solution and try restoring a backup.

Solution 4: Restore a backup of the company file

These are the steps in case you try to restore a backup of your company file but face trouble-

  • Check the path length of your company file – it should be within the range of 210 characters.
  • Determine whether your computer is hosting by opening the company file.
  • Once you have made these changes, you can retry the restoration of your company file.

Solution 5: Shutdown each and every QuickBooks process

  • Use the Administrator account for this one particular solution to QuickBooks error code 6000 83.
  • Once you are logged in, open the task manager by using the shortcut key combination – Ctrl+Shift+Escape.
  • Open the Processes section by clicking on the Users tab.
  • Select all of the QuickBooks processes and click the End Task button.
  • Proceed to open the multi-user mode and then your company file.

In that case, if the QuickBooks Error 6000 83 is not solved, perhaps it may be time to consult experts like our ProAdvisors via chat or you can call at 1.800.579.0391. We can go through all the steps and solutions faster for a more convenient and better resolution of your QB-related issues.

Related Post: QuickBooks Error 6147

How to Get Rid of QuickBooks Error 1402 Step-By-Step

QuickBooks Error 1402

We all are familiar that QuickBooks is a highly innovative accounting tool. It is no less than a blessing, especially for mid-sized and small-sized businesses worldwide. But along with that, it is also a tool that was displayed unwanted issues. QuickBooks error 1402 belongs to that unwanted list of topics.

Each time a user tries to download a payroll update on the system, it usually occurs. Although it can be easily resolved, it still affects an individual’s workflow. As a result, users confuse it with QuickBooks Error 15102 as that problem also rises while downloading a payroll update.

This blog will help you get a fix for error 1402 and explain the prime causes. We will also provide the essential solutions to get rid of it. Follow the steps and remove the problem easily. At QB Pro Solution, our fundamental aim is to ensure that all the users have a smooth accounting experience.

Primary Causes of QuickBooks Error 1402

There are some reasons for QuickBooks Error 1402 to see, but the main reasons for it are as listed below: –

  • Inappropriate file setting or positioning a damaged file in the QB folder.
  • When the user does not reboot after a successful operating system upgrade.
  • Microsoft Visual C++ consists of a damaged element.
  • When the Windows Registry button is not found or is incorrect.

Related Post: QuickBooks Error 1712

Methods to Fix QuickBooks Error 1402

Various ways to resolve QuickBooks error code 1402 are available online. But we will provide fully effective solutions. We suggest users not rush or skip on minor details.

NOTE: Enable/On on the built-in Administrator account on the system before using the steps.

For Users of Windows 7:

  • From the startup menu of your Windows 7 system, visit the Control Panel.
  • You will see a list of options to select User Account to open it.
  • Open the Create/Make New Account option and type a name as you wish.
  • Apply all the settings you recently exited the window.
  • After that, use shortcut keys Alt and F4 to switch off your PC and when it shuts down, switch it on again.
  • Log in to the system using the credentials of the new admin account you made.
  • Now, try to download and set up QuickBooks; the problem will no longer appear.

For Users of Windows 8:

  • The steps to resolve QuickBooks error 1402 for windows 8 users are different, starting with opening the RUN window.
  • Enter MSC in the search box window of Run as this will open the Accounts Manager window.
  • A list of users will appear on your QuickBooks screen; if you notice carefully, You can see the admin account and it will be visible on the extreme right side of the panel.
  • As soon as you see the Administrator account, click twice and select the Properties option.
  • This will open a window that displays several options with Account is Disabled checked on; all you need to do is uncheck that box.
  • Now, we will restart the QuickBooks system, and once it is back online, we will have to log in using the new Administrator rights.
  • After nu-checking the box, close all the windows and quickly proceed towards switching off your computer.
  • Turn the PC on and log in using the new admin details.
  • Attempt to install QB once again.

Alternative Solution

Many times, error 1402 displays because of the Adobe Flash Player settings. Downloading QuickBooks File Doctor can solve the problem for you. After the diagnostic tool completes the scan procedure, uninstall and reinstall Adobe Flash Player.

We hope that the techniques mentioned above help you eliminate QuickBooks error 1402. As service providers, we understand the value of the right solutions, so we provide our customers with troubleshooting steps that are tried and tested.

If the error still exists, you can reach out to our professionals. Our team has years of expertise in holding such problems. We can indeed remove the Issue for you in a few minutes. To connect with us, you can either call us at 1.800.579.0391 or place a comment below. We are also available via live chat.

Related Post: QuickBooks Error 179

Here’s How You Can quickly Resolve QuickBooks Error 1712

QuickBooks Error 1712

QuickBooks is a huge help for businesses everywhere and anytime, thanks to its extensive features and updated versions. However, certain issues like QuickBooks error 1712 can creep up due to any reason on any given day, interfering with the accounting tasks and not letting the users complete them on time.

This particular problem generally occurs due to damaged OS or system files in your Windows-based computer. It also happens when some of the elements being used by QuickBooks are corrupted and cannot be used properly anymore, forcing QB to show this message.

In this blog, you can read more about the causes of QuickBooks error 1712 and how to resolve this situation in an effortless manner. You can also take a look at similar blogs that have been written to help you solve problems like QuickBooks error 1328.

Related Post: QuickBooks Error 15106

Why Does QuickBooks Error 1712 Occur?

The main cause of this is damaged files, though another reason could be any changes that have been made to software within the same computer. In case you are wondering why would installing, uninstalling, or modifying some other application should affect QB, the answer is simple.

Windows must restart after making such major changes in order for them to be reflected in the system, or else other programs using those deleted files can misbehave and stop responding.

Apart from these reasons, it can also occur if you try to install your QB software in a coded or damaged folder. A preventive measure, in this case, would be to install the software in a different folder and location than the one that is suggested by default.

How to Resolve QuickBooks Error 1712

There is more than one way that you may try to fix this issue on your computer. They have been mentioned below-

Solution 1- Use Selective Startup mode to install QuickBooks and eradicate the error

Step 1: Restart your desktop computer or laptop and open Run. If you don’t know how- press the Windows and R keys together or type Run in the search bar of the Start menu of your desktop.

Step 2: Type MSConfig in the Run window location and then click OK to proceed.

Step 3: Open the General tab and look for the Selective Startup section below. Make sure that the Load System Services option is checked.

Step 4: Click the Services tab and tick the box for Hiding all Microsoft Services located at the bottom. Then, click on the Disable All button under the Services section on the right of the screen.

Step 5: Unchecked the Hide all Microsoft Services box.

Step 6: Look for the checkbox for the Windows Installer option in the list of services and make sure that it has been checked.

Step 7: Once you do this, click OK and then Restart on the System Configuration Window. You can try to install your QB software again after it reboots.

Solution 2- Trying the QB tool to install your application cleanly

Step 1: Follow Steps 1 to 7 from Solution 1.

Step 2: After your computer has restarted completely, download this program on your computer- QuickBooks Clean Install Tool.

Step 3: Open the program file and then select the checkbox for “I Accept…” at the bottom, below the license agreement.

Step 4: Click on your version of the QuickBooks software that you want to install and then press Continue. Select OK after you get a message saying that a clean install can now be performed.

Step 5: If you are still getting QuickBooks error 1712 then Uninstall QB via the Control Panel by following these steps-

  • Go to Programs and Features in Control Panel and select the QB software that you have to uninstall.
  • Click Uninstall and proceed by following the on-screen instructions.
  • If you are not getting these options, log out from the current user and try again as an administrative user for Windows.

Related Post: QuickBooks Error 1603

Step 6: Reboot your computer and install your QuickBooks software again by following step 4. This time, do it as an admin user of your QuickBooks Windows PC.

If the issue persists after following all of these steps, please do not hesitate to contact our experts via chat or you can call at 1.800.579.0391. Our team has ProAdvisors who are well-prepared experts and always ready to assist you or fix all of your QuickBooks-related problems like QuickBooks error 1712 with great ease.

Easy Process to Resolve QuickBooks Error 15106


QuickBooks is an outstanding accounting program that offers some great financial and tax management features. It won’t be wrong to say that it makes day-to-day handling of transactions smoother for users across the world. But along with that, it also ends up showing errors sometimes.  These issues come up as soon as you open your software.

Some of the most common issues are QuickBooks Error 15106 and QuickBooks Error 15311. Issue 15106 shows when a QuickBooks user is unable to download QuickBooks Desktop updates. The error message that pops on-screen is ‘Unable to open the update program’ or ‘The update program might be damaged.’ In easy words, it is a type of payroll issue that does not allow the user to update the software.  

In this blog, we will provide you with the solutions as well as the causes behind this problem.

Relates Post: QuickBooks Error OLSU 1013

Causes of QuickBooks Update Error 15106

Presence of the Spy Sweeper in the WebRoot Antivirus Program

If you have Spy Sweeper installed on your computer, then that is causing the QuickBooks Error 15106 to arise. It stops QuickBooks from updating and takes it as malware that downloads unwanted files.

You Are Not Logged In with the Username that has Administrator Rights

Administrators or admin is a person who has the right to edit or modify important entries of a computer system such as programs, records, adding or adjusting user accounts, etc. You need to have admin access to install or update any program. Thus, if by any chance you log in by using any other username, the software will show an error.

How to Fix QuickBooks Error 15106

Any user can find out whether or not the above-mentioned reasons are causing the error. They can do that by using these methods: –  

Method 1:

Verify if Spy Sweeper is running.

  • On your keyboard, press ‘Ctrl+Esc+Alt’ together in order to open the Task Manager.
  • Look for the “More Details” options at the bottom of the window and click on them.
  • Now, click on “Processes” and check whether or not “SpySweeper.exe” is still running.

Method 2:

Quickly check if you have logged in as an Admin.

  • From the Start Menu, open Control Patel and then go to ‘User Accounts.
  • A new window will open which will display the account you have logged in from. You just need to verify whether “Administrator” is displayed below your account picture or not.

Steps to Resolve QuickBooks Error 15106

Not many users are aware but it is extremely easy to fix QuickBooks payroll error 15106. Just follow the simple steps and the issue will vanish. In case the solutions do not work, you can call us any time and get a working solution for it.

Here are the steps:

Remove the Spy Sweeper Program
If “SpySweeper.exe” appears in the task manager, you need to uninstall it right away.

Step 1 – In the start menu search box, type ‘Add/Remove Programs
Step 2 – Once the window is open, find Spy Sweeper in the window
Step 3 – Simply click on it and choose the ‘Uninstall’ option.
Step 4 – The computer will take a few seconds and remove it from your system.  

Log in as Admin

  • If you have not logged in as an administrator, then you need to do that right away. Switch user accounts from existing account to the one that has administrator privileges. After that, try to update the program again and check whether QB Error 15106 still shows up.
  • If you have already logged in as the Administrator and cannot see Spy Sweeper anywhere on your system, then just ‘Reset’ the updates.

Step 1 :

From ‘My Computer’, Open C Drive

Step 2 :

Now, open C :\ Program Files\ Common Files \ Intuit\QuickBooksxx\Components

Step 3 :

Navigate the folder named ‘downloadqb<nn>’ and rename it to ‘download<nn>.old.’

These steps will hopefully resolve QuickBooks Error 15106 for you. But if they don’t, then please uninstall and reinstall the QuickBooks software from your PC.

If you have any questions or queries related to the blog, don’t think twice and get in touch with us. We provide 24/7 online as well as phone support to all our customers. You can call 1.800.579.0391 for professional assistance.

Our team takes each customer query seriously and works towards solving issues in a rapid manner.

Related Post: QuickBooks Error 1625