PolyEvolver editor

[netchose]

[attachment=3:3kcfbzzj]poedit.jpg[/attachment:3kcfbzzj]

[attachment=1:3kcfbzzj]seq03.png[/attachment:3kcfbzzj]

[attachment=0:3kcfbzzj]PolyEvolver seqencer editor 0.31.zip[/attachment:3kcfbzzj]

improvement :
all sequencers are in tabs
value are displayed with number and with note
add buttons that increase and decrease all seq sliders ( Lua)

the toolbox doesn’t work. it’s the next Lua project

[attachment=2:3kcfbzzj]poly2.zip[/attachment:3kcfbzzj]

thanks to Atom

[netchose]

update with seq editor, few fix and signal flow on the voice editor

[netchose]

update :
work with new CTRLR revision.
some little improvements

how it work => follow this step :

open the combo editor, and the other editors.
go in the CTRLR program manager and set the delay time between each message to 10ms
close ctrlr and reopen it => if you don’t do that the delay time will be apply only to the
first opened editor

what’s next :
i would like to have 2 controls for the same parameter : one slider and one increment bouttons.
if it is now possible, the two bouttons are not sync
the problem could be fix with one increment boutton linked to another modulator that could send +/-1 messages

i’m’ working on new version with tabs, but all voices will be in different files : for preset management reasons
i ‘ve asked a sepcial function to atom in order to make sequencer preset ( diatonic, minor etc)
convert this file to mono evolver ( very simple)

i’ve made some test with energyXT and with the 9 files opened and it is a little bit slow

[Filch]

Wow,

I really love what you’ve done here. Mad respect for taking on the poly evolver too, it’s sysex can be a bit complex compared to other ones I’ve seen. This is one of my favorite synths and I can’t wait to crack into it with this.

[netchose]

sequencer update with tabs and note value

[Layzer2]

Looks Great!!

[netchose]

thanks !
update with first lua code

[netchose]

title change :

– improvement :

combo , voice and sequencer are toghter in the same panel
tool box work( but only with arp direction up)
tabs deleted and replaced by lua navigation system

todo

add aone editor per voice like sequencers
add a global setting page
convert this panel to mono evolver

later or if you want to work with me : program and bank management

don ‘t use in production this version is just for sharing lua code experience

[attachment=0:296asiga]PE-work.zip[/attachment:296asiga]
[attachment=1:296asiga]pework.png[/attachment:296asiga]

[Filch]

Oohhh…

Might have to pour over some of this code to see what I can lift from it ” title=”Smile” />

[netchose]

when you open the panel you have a lua bug message, : it is not a bug from my code ” title=”Very Happy” /> :

if you save the lua code for the 6 button, to the top it will work

it is a ctrl bug/ lua bug : when a button has a lua code which call modalutor with a vst index
superior to the vst index button it ‘s like the code call a not created modulator and you have a
nil value

to correct this, i have to copy and past the 6 buttons, so the 6 new buttons will have a bigger vst index

i hope Atom has understood

bug exemple : [attachment=0:izop08w6]luabug.panel[/attachment:izop08w6]

[netchose]

some news :

Combo view finished : full sysex dump sync + new design+save and load sysex
combo memory view finish : you can request all combo names
combo voice editor new design

to do
-program name memory view , sync voice and seq to the dump

i hope finish before end september

[attachment=2:2e6wvrdt]cview.png[/attachment:2e6wvrdt]
[attachment=1:2e6wvrdt]pgName.png[/attachment:2e6wvrdt]
[attachment=0:2e6wvrdt]voice.png[/attachment:2e6wvrdt]

[netchose]

some news :

my polyevolver is defective. the dealer can not exchange it because the polyevolver rack is no longer produced.
so it’s the end of the project.
in exchange, I get the dsi tempest. a new adventure in perspective.

[atom]

I’d love to get my hands on the Tempest. Have phun with that.

[creativeone]

I was starting to put together a panel for Poly Evolver Keyboard… but noticed this thread… where can I download the panel that you guys are talking about? I see references to attachments above, but non of them link anywhere… can someone send me a link to the latest for Poly Evolver panel? Thanks!

Also, I’m using it as a VST in Ableton Live… and was having trouble figuring out how to get the MIDI notes to come through so I can record them in a MIDI track in Live… (I want to be able to play the Poly Evolver Keyboard, with the CTRLR recording knob changes, but the notes coming through the VST to a track in Live… how can I set this up… so MIDI notes come from the PEK, through the CTRLR VST, and into a Ableton Live track for recording.

Thanks,… this looks like an awesome tool! Can’t wait to start using it and building out some more panels for outboard equipment!

– Jason

[Author]

Posts