Forum Replies Created
-
AuthorPosts
-
dont thank me i “just” added the knobs ๐ i couldnt have done it without jbeuckm and possemo ๐
my ctrl skills are minimal too thats why i used jbeuckm mpx100 editor from the start ๐
i also have the tc electronic m3000, but also come back to mpx550 – i like both but the 550 have more punch in the reverb
the editor does make it a bit lighter in reverbyou can do some awesome effects in it now, the echo effects kicks ass, but it takes time to find them via the knobs
its far from finishd so prepare to turn the unit on and of a few times ๐
hope it works for you too
thank you for the much nicer looking panel Possemo! ๐
it is now much better, not finishd though
There was some sysex that had to be removed and added ๐
I had to remove the Presetmenu in the “System/misc” it crashed the mpx550 heavily! that was hearing digital noise like iiiiiieeeeeooooozzzzzclickclickclick ๐
I added the Dynamics too ๐
Very important that you load the Algorithm aka Ambiance or Plate etc first on the MPX550 before editing the algorithm on Ctrl, or it will freeze/overload if you try to edit other
I will test it again later just to be sure, i will look more into exactly which Preset i have to choose on the mpx550
before this editor was made MPX550 was atcually nothing special, allthough its still a bit dark sound, but better than before, even though it was the latest Lexicon with the famous LexiChip inside
Now – it kicks ass! ๐I understand why Lexicon didnt add the extra knobs to it, because i think they wouldnt have sold so much with their new products after mpx-series ๐
I will look in REV500 some day, IF its possible with their midi implentation
- This reply was modified 4 years, 8 months ago by kims.
Attachments:
You must be logged in to view attached files.Ok but i noticed that yamaha wrote “*1) Ask Yamaha service representative” ๐ i know sound quest have an yamaha rev500 editor, but theres no adjustment of knobs in it
like there is for my t.c electronic m3000 using sound diver 3.0.4, (its a kickass editor!) neither they have adjustment of knobs in it for rev500both are only sysex dumps (save presets) for rev500
regarding mpx550 on the algorithm – i thought the same, but when jbeuckmยดs mpx100 editor works(?), then it must be like that or what ๐
maybe thats the whole problem – mpx550 dont know which algorithm is used and then it freeze/overloads
the algorithm numbers are all the same….hmmm ๐i could also try to make a knob from 1-10 with the possiblty to change algorithm, in Chamber etc
i cant see any midiinformation on the panel when changing algorithm on the mpx550, it has many diff. presets for example Chamber (small chamber, large chamber etc) and to make it worse – combined with other effects
thank you for the help i will try them out
- This reply was modified 4 years, 8 months ago by kims.
heres is finally an example from the mpx550 editor
its recorded with my zoom h1, ยดnot the best recording, but better than nothing right ๐
sorry theres no video yet
https:
//secufiles.com/ao7p/ZOOM0001.WAV
- This reply was modified 4 years, 8 months ago by kims.
i learn and learn, now i noticed that when i load the preset repesenting forexample Plate on the unit, it all works fine, so the preset Plate, Ambiance etc have to match Ctrlr
i cant get “System” and forexample “Vpanel” to work, dont know what Vpanel is ๐ i guess it an on screen display
I have to be very careful adjusting the knobs becasuse the unit can do so much more in the effects than on the unit it self
in Ctrlr it can make some awesome long big reverbs than it can on the unit, it sounds so much better in Ctrlr
yes ive seen that text, but i followed their great MIDI Implementation (thank you Lexicon, you could learn a thing or two there yamaha!) but i have only used the same knobs for example Chamber, inverse etc, so it should work
allthough in my video i noticed that when adjusting the Predelay and Attack the reverb starts to flange as its like these 2 are the same thing(?)
but then why did lexicon add them to the Chamber in the MIDI Implementation…hmmm ๐
i dont know how to program all this, its just a copy from jbeuckmยดs mpx100 editor ๐
cant acces my youtubechannel at the moment so cant upload the video (4 gb)
Ok i try to change it to F7 again ๐
the overload/freeze happens when i try to change to other effects, example “Inverse” in Ctrlr, and then adjust the Predelay
sometimes i dont even get to adjust the Predelay, then it freeze/overloadIn Chamber it SOMETIMES work fine, but theres a clicking sound when changing effect in Ctrlr – that isnt there on the panel on the MPX550
As i know the other knobs works fine
the Predelay is measured in ms on the unit
when changing size (4.0m-76m) on the unit it is writing “rebuilding” on the panel
All of this i cant see when using ctrlr. only the written “MIDI” on the panel on the unit
im about to make a video of the chamber in ctrlr
Attachments:
You must be logged in to view attached files.ok a new update
the full SYSEX ADDRESS address for the knobs doesnt work (just as jbeuckm say in the video parts), only the first 4 of the 7 sysex works
when using the “PreDelay” on the editir it often freezes MPX550, and specally when changing to other effects such as DX1 etc
when closing Ctlr and only using the Chambers effect all works ???i noticed that the “Predelay” affets the “RefDelayL, RefDelayR, EkoDly R EkoDly L EkoFbk L EkoFbk R” because when set to zero, it overloads MPX550 and freezes
But thats what i dont understand it shouldnt happen when changing to forexample Plate…but it does
i bet its the script…i dont know
thank you very much for answering, i was close to forget about ctrlr
the ModulatorCustomIndex is 0002 0000 0011, which is the “Algorithm: 0 to 10 0002 0000 0011 0000 0000 0000 000A”
jbeuckm says in part 2(or 1) that the last ยด0000 0000 0000 000Aยด isnt nessary
i DIF try all the numbers, no luck with that
and ModulatorCustomIndexGroup is allready set to 01.
i hope its not an error the script in component-“modulatorchanged” for the MPX550 because then im lost ๐
i hope the MPX100 and 550 are the same in the script ๐i did try things as change it to ‘F0 06 16 00 01 01 (added the extra 01, “6. Additional Bytes” and a E7 “10. MIDI Closing Byte”) as written in the MIDI Implementation, (jbeuckm says in the Video explanation that the E7 doesnt work so he changed it to a F7)
by the way thanks to Lexicon for the MIDI Implementation, i also have a yamaha rev500 which i would like to make a editor for, and askd yamaha for more sysex parameters, but yamaha havent answerd yet for a week
can anybody confirm that the editor actually works for the MPX100??
its like Ctrlr are missing a command to tell MPX550 to start from zero?
Ok thanks i just thought it was possible on this website ๐
Im still experimenting its like MPX550 cant “reset” it self when starting to use Ctrlr it does some crazy feedback SOMETIMES….?
oookay..
i been fidling with the editor for my mpx550 for the last 3 days, i cant get it to work properly:
it freezes the unit alot, specially when using the PreDelay, dont know why… sometines it works and then its possible to make awesome reverbfx!
can anybody help on this?
How do i add my panel in this forum? file is too long?
I guess i can use this on my MPX550 too, just change the existing knobs to the MIDI Implementation Addendum for MX550…right?
-
AuthorPosts