[wikter]

Well, i’ve found a workaround for this rare bug.
I Use these functions to correct the values exchanged between hardware/Ctrlr.

lt (modulatorValue, 0, 16384 – (abs(modulatorValue)), modulatorValue)

lt (midiValue, 128, midiValue, midiValue – 16384)
or
lt (midiValue, 128, midiValue, midiValue/2)

Anyway, it’d be great to know that MSB is 7bits and has a range of 00-7f, instead of the 00-ff 8bit range.

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

Hi, I was trying to create a function based on the midivalue, but just for the hardware control, then I needed the inverse function of modulatorValue.
Here it is!

lt (midiValue, 128, midiValue, midiValue – 16384)

Thanks!!!

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

image?

Attachments:

You must be logged in to view attached files.

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

Here we got some work… Part2 not yet implemented, but almost everything is a copy of part1 with a different sysex part identifier.

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

Ok, I said nothing about controllers…
I’ve found that the CC’s are shared by both “synth engines”.
The only way to edit separately those 2 engines is using sysex.

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

Well… we’ve got a problem for the tuning parameters in Sysex…
R3 sends a “polarity” value whe it reaches 0 and starts the negative values:

RAW:[f0 42 30 7d 41 11 00 14 00 02 00 f7]
RAW:[f0 42 30 7d 41 11 00 14 00 01 00 f7]
RAW:[f0 42 30 7d 41 11 00 14 00 00 00 f7]
RAW:[f0 42 30 7d 41 11 00 14 00 7f 7f f7]
RAW:[f0 42 30 7d 41 11 00 14 00 7e 7f f7]
RAW:[f0 42 30 7d 41 11 00 14 00 7d 7f f7]

On CTRLR I’ve used LSB/MSB but the output of MSB becomes 8bit!!! And sometimes it makes data disappear when it’s substracted…

RAW:[f0 ** ** ** ** ** ** ** ** LSB MSB f7]
RAW:[f0 42 30 7d 41 11 00 15 00 03 00 f7]
RAW:[f0 42 30 7d 41 11 00 15 00 02 00 f7]
RAW:[f0 42 30 7d 41 11 00 15 00 01 00 f7]
RAW:[f0 42 30 7d 41 11 00 15 00 00 00 f7]
RAW:[f0 42 30 7d 41 11 00 15 00 7f ff f7]
RAW:[f0 42 30 7d 24 f7]
RAW:[f0 42 30 7d 41 11 00 15 00 7e ff f7]

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

OK, I think there’s a problem with those “midi CC’s”… R3 has a programmable midi CC setup. Mine is reprogramed. I’m thinking about doing an adaptation of this, because it’s easier to contorl mi studio from a single DAW. I’ve got any piece of HW plugged into a multichannel interface. 22 inputs + Guit + Mic…
The problem is to adapt those controllers… anyone else interested in this?

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

Well listbox did the job, it’s not as cool as a dropdown menu with all the waves, but it’s usable.

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[wikter]

but listbox has no columns…

MVXSynths
R3 / MOX6 / Electribe2 / Electribe R MkII / Electribe MX / K4R / BCR2000 / XStation61 / XStation25 / Virus Rack / Chameleon / Proteus 2500 / RM1X / KN2600

[Author]

Posts