So, you are about to perform Netgear Nighthawk router setup process, right? If yes, then you must have access to your PC. Oh no! You don’t have a PC? Fret not! Netgear Nighthawk router setup can also be completed using a laptop or a mobile device. Yes, you read it right! So, don’t feel out of luck! You can easily set up your Netgear Nighthawk router using a laptop or mobile device.
In this post, we will ring up the curtains from the Netgear Nighthawk router setup process without PC. Let’s get started, shall we?
Steps to Set Up Netgear Nighthawk Router Without a PC
Here are the step-by-step instructions for setting up your Netgear Nighthawk router without a PC.
- Power on your Netgear Nighthawk router. Place your router in the same room where you have kept your modem.
- Once done with the placement, grab an Ethernet cable and connect your Netgear Nighthawk router to the modem.
- Wait for the Netgear Nighthawk router’s power LED to become solid green.
- Turn on your laptop or mobile device.
- Connect it to your router’s WiFi network.
- Open an internet browser of your choice on your WiFi-enabled device.
- Enter www.routerlogin.net in the address bar of the internet browser.
- Once done, press the Enter key to Continue.
- The Netgear Nighthawk login window displays.
- Provide the default router login credentials into the required fields and click on Log In.
- The web-based setup page of your Netgear Nighthawk router displays.
- Follow the on-screen Netgear Nighthawk setup instructions for the configuration of your router in a hassle-free way.
Note: For the configuration of your router using a mobile device, download and install the Netgear Nighthawk app.
And there you are! In this way, you can easily set up a Netgear Nighthawk router without PC. Facing issues while setting up your Netgear Nighthawk router using a PC or a mobile device? Worry not! Just follow the fixes listed below in order to cope up with Netgear router setup issues. Keep scrolling down!
Power Cycle Your Netgear Router
To fix any router-related issues, this is one of the most effective and proven troubleshooting tip. Chances are that your router is tired and overheated and that is why it is giving you setup-related issues. Thus, to fix it, do the following:
- Right off the bat, disconnect your Netgear Nighthawk router from your mode, laptop, and mobile device.
- Once done, unplug it from the power socket.
- Count to 300. In short, wait for 5 minutes.
- Then, plug your Netgear Nighthawk router back in again.
Use a WiFi Connection
For Netgear Nighthawk setup, connect your modem, laptop or mobile device to your router in a wireless manner instead of the Ethernet connection.
Update Your Router’s Firmware
If the firmware on your Netgear Nighthawk router is outdated, then also you may encounter with many technical issues. So, to make the most out of your Netgear Nighthawk router, update its firmware on regular basis (whenever available). You can update the firmware of your router either by accessing the Netgear Nighthawk app or the web-based setup page of your router.
Note: For Netgear Nighthawk app setup, it is important to connect your mobile device to the router’s WiFi.
You’re all Done!
These were some fixes that you can apply to cope up with any router-related issues. We hope that the fixes listed above have helped you out to set up your Netgear Nighthawk router in a hassle-free way? In case, you can’t set up your Netgear Nighthawk router, reach out to our competent technical experts immediately. They will help you complete the Netgear Nighthawk router setup process in no time.