- This topic has 4 replies, 2 voices, and was last updated 7 years, 1 month ago by
.
-
Posts
-
i see there is no min/max on the Combo modulator.
i want to add an ASCII list, which runs from
32-127 midi values – all ASCII characters – whilst
showing the characters on the combo.how is this done? it is a series of ten modulators
for setting the patch name.let’s open someone else’s panel and have a look…
pulling one up at random, the rather brilliant ESQ1 panel.
(which appears to be using NRPNs – good place to look if
you need to use those) thank you jaseFOSso you put the in the combo list with ‘=’
and only the bit before ‘=’ is seen on the combo.
so i’ll try that.
eg:
LFO1=0
LFO2=8
LFO3=16
ENV1=24
ENV2=32
ENV3=40
ENV4=48
VEL=56
VEL2=64
KBD=72
KBD2=80
WHEEL=88
PEDAL=96
XCTRL=104
PRESS=112
*OFF*=120(what is ” *OFF* ” ?? why the symbol? )
ok, so that should be sorted 🙂
here’s a little example panel of a group of character
selectors – not an actual ascii list – shows how
some characters interrupt the listing (2nd box)
(see ascii name_v01.panel below)i haven’t yet figured out how the width of the dropdown
list works, it comes out wider than it should.any explanations here would be useful.
(the idea of this panel is to build a preset namer
within a panel – 10-character name)You need to play with the 2 last numbers in “Component position and size” and also with “Label width” (when the label is on the left side).
Have a look on my Pro2 panel…i’ll try label width. already tried all options i could find.
strange how the 2nd group combo in that panel example goes so
wide – it must be all the listed invisible items entered as one
or something. in the character list, it must be some syntax thing
Ctrlr picks up on -? –do you know how to make a ‘increment/decrement’ control a list?
(combo) so it can step through one at a time? i got it working
before but i don’t know how i did it(…)i also have another thing i’d like to try:(separate issue)
depending on one other parameter option,
i would like the list to change. if you look at the D-110
panel, PCM can be PCM group 1 or 2. because the waveform
type depends on the ‘Structure’ parameter, which selects
either ‘S'(synth’) or ‘P'(PCM) as inputs to the ‘structure’
(mix/ringmod etc)i had to use a workaround.
i don’t know how i would make a different combo list appear,
unless it used a Lua, and the combo used another one that
used a text list, -or something similar.
- The forum ‘Using Ctrlr’ is closed to new topics and replies.