Build 1475 Checked…

[pirufly]

Hello I had checked the new builds and I found these problems:
-Send Program Change on load. OK
-Bank button Change, don’t work… perhaps also will be usefull to limit the bank (or expand) and program numbers to the real that have each unit. In example…:
-Mopho (3 Banks:1,2,3/Programs 1-128)
-Prophet (2 Banks:1,2/Programs 1-128)
-Evolver (4 banks:1,2,3,4/Programs 1-128)
-Tetra (4 banks:1,2,3,4/Programs 1-128)
-MBrane (1 bank/Programs 0-110)
-Aibase (4 banks:0,1,2,3/Programs 0-255)
-Xbase 888 (1 bank/Programs 0-255)

-VST input to physichal output, don’t work.(I have to select MIDI Thru option to play)
-Send program on load "HANGS" my DSI units ( I have to restart them)
-….. is a thought….perhaps…. you build the controllers in VSTi format but for our purpose don’t need any audio output, perhaps if you build the ctrlr in VST MIDI plug ( other DAW’s, I don’t know, but Cubase accept MIDI VST plugs inserted in a MIDI chanel, then all MIDI info, including MIDI Clock, goes through the plug and that only insert or transforms some filtered info…. is an idea……)
-A MIDI feedback between crtlr and hardware about the paramater values of each program (preset), will be crazy!!!!… ” title=”Wink” />

THANK YOU FOR YOUR WORK.

[atom]

– bank button will be fixed (once i get a proper audio interface to my new pc), it needs some tests
– MIDI Thru has to be enabled, and this is how it was designed
– make sure you are not sending any MIDI settings, those parameters will be sent with the program, and it’s possible that you are sendind a message that disables MIDI, so no other midi messages get’s through, if that does not help try setting a delay for the program send
– no such thing exists, VST MIDI format is recognized only by cubase and no other host, it’s a standard that didn’t stick, i can disable audio in/outs in plugin settings, i just don’t know how will other DAWs react to this at the moment it’s a standard 2ins 2outs setting (and timing info is always there, but in VST format not MIDI format)
– it works but in some limited cases, once i get the audio interface i’ll work on that a bit more.

[Author]

Posts