[AnalogJunkie]

I managed to get it going. I dont know why the older panel didnt work – but the latest does. I couldnt get it to change Tone Lower B though. That just wouldnt budge. When I changed it on the JX it reverted back to what it was on the Panel. maybe I am going mad.

On the MIDI set up I hastily set the Thru option – I had MIDI feedback and it completely trashed the memory of the JX – hilarious – took a special feature that Fred put in “Hold Lower & Write” at switch on to clear RAM, then reload factory data from a cartridge.

I will have to play with it a bit more but testing other things on it at the moment.

Cheers
GUy

[AnalogJunkie]

FYI
Exchanged an email or two with Fred today on other things and i mentioned your panel. He responded with:
“The key mode is indeed a weird one, because Roland sends it with 2 sysex. That guy could be missing this, I dont know. When the keymode is edited, their roland version should be updated too. (changing the key mode is not trivial)”
That might give you a clue or two.

Just trying to get the panel to work with my JX at moment…
Cheers
Guy

[AnalogJunkie]

Hi Guys
I have a JX10 with Vecoven 3.02.

Is teher any reason why this panel can’t work with the JX-10 with Vecoven software?

I tested it out and could only get the patch change to work despite enabling SYSEX APR/IPR and CC parameter changes – basically “everything on” – I will investigate deeper with a MIDI utility in next few days as I’d like to understand why not.

If it does need an extra setting adding, I am happy to help test out the JX10 side of things for you guys.
So far this is the best control panel around, very impressive work.
Cheers
Guy

[Author]

Posts