[MaurizioB]

Thank you so much.
Your panel is working, I’m trying to work with it and it looks like I’ve found a problem with the fx mix. The controller number seems to work fine with a different number (my manual reports 321 and not 65, but that doesn’t look a problem), I’m unable to obtain values lower than 50%. Even if the midi message sent seems right (at 50% the last 2 ccs are 0-0, at 49% they’re 127-127 as they should be) the Fx Mix reported in the Micron display shows “0% dry 100% wet”, for any value going from 0 to 49 in your panel.
I’m still learning about NRPN’s and Ctrlr, so I can’t tell you if it’s a bug and from where it is.

Thanks again

[MaurizioB]

clancy: I finally had time to look at the morpho panel, thanks; still have a lot to understand (I’ve not really understood how the -2’s and -1’s value are interpreted).
nanasi: If you want you could send me yours, I’d like to understand how you work with messages and I can tell you if it works with microns too, anyway.

[Author]

Posts