Home › Forums › General › Panels, Components, Macros › Shruthi-1 Editor
- This topic has 39 replies, 1 voice, and was last updated 4 years, 2 months ago by AndyHornBlower.
-
AuthorPosts
-
January 12, 2012 at 12:10 am #536
Attached is the Editor.
[b:2f9e8mab]EDIT: V2.5(4/25/2012)[/b:2f9e8mab]
version 2.5 (2.3 and 2.4 never released just internal releases
-changes for latest 0.96 Firmware (19April) ( the prev 0.96 did not handle operators in the right way )
— operator handling
— osc1 = osc2 and correct some namings
— OSX Mix all from DUO to SEQMIX
— MOD Matrix Source Destination adaptation
-fix fpr automation in daw ( e.g repaer did not update the env in track on changes of values directly on shruthi, forgot the update to the daw on parameter changes ..wuahh)
-dynamic osc mix naming on osc op settings e.g FUZZ now called AMOUNT on OSC MIXer
-patch name correct for names < 8 chars[b:2f9e8mab]EDIT: V2.2 (4/13/2012)[/b:2f9e8mab]
Panel has been updated to reflect additions added to official Shruthi-1 V0.96
Added:
–New Mixing Modes (duo, 2step, 4step, 8step, seqmix)
–New Mod Matrix Sources (trigger 1 & trigger 2)
–New Mod Matrix Destinations (envelope 1 & envelope 2)For a detailed list of changes go here[/url:2f9e8mab]
[b:2f9e8mab] EDIT: V2.1, yo! 2/22/2012[/b:2f9e8mab]
version 2.1
smale update
– prg change now working also with user bank
– auto dump request if u change it on shruthi ( enable auto request + enable prg change )
– init patch to default
– bugfix on storage handling i sended the wt twice on recover (sry)Widy has struck again and with a new version! 2.0 is the bees knees!
New feature list:
update to version 2.0
===================
— supports upload of wave tables
— create own wave tables based on
–8 sin osc additive (change source for other frequency
–band limited saw square tri ( band limitation can be configured on the fly , smooth factor)
–load 2 raw pcm format to load any kind of wt ( load at least all of http://mutable-instruments.net/static/d … eforms.zip )
–mix between own generated and loaded
–quick preview ( during creation by sending on the fly sysex )–store in slot 0-7 of shruthi
–morph between slots from 0-7
–send all slots to shruthi
–load and save sysex wt’s–wt’s can also (optinal) stored to the sound patch stots 1-6
–recover stots 1-6 with or without wt ( could also used for exchanging wt’s in patches )
–wt’s full (optinal) recover on save load of daw project or offline online in an project–also mode switch for smr-4 svf pvk filter board use (renamed it to Shruthi-1 Editor )
–enable disable nprn usecould not update ..im not the creator so here is the file
have fun … if a bug exists search for a second one .. every little bug needs a little friend ..no.. report it .. i will fix it
lg widyJanuary 12, 2012 at 12:14 am #3749I’ll check the DDB but this might be an issue with the SF.net caching stuff.
Panel updates, that depends on what you mean, you can request a program and update the panel using LUA there is no automagic way to do it any other way.
January 12, 2012 at 12:31 am #3750Thanks for the quick reply, atom!
I kinda figured it wasn’t just a "cut & paste" kinda thing to get the current device settings. I am completely new to a lot of this and am unfamiliar with LUA. I’ll delve deeper into it and try to figure it all out. I’ll get it eventually.
January 12, 2012 at 5:13 pm #3751if u need help to
-send a dump request and parse the sysex received and write the values to the modulator
-or send a sysex dump generated from more modulator valuespm me .. i can send u some code
not for the shruty .. but u just need to fill a kind of list with the right names and id’sJanuary 12, 2012 at 7:13 pm #3752@ widy75, That would be awesome, thanks!! I’ll pm you tomorrow. Gotta head to the airport and hope my flight doesnt get cancelled again! ” title=”Confused” />
January 12, 2012 at 10:08 pm #3753Thank you !
January 28, 2012 at 10:24 pm #3754hi
thx for the shruthi editor …..i build mine today…..and it works fine so fare
what about requesting patches from shruthi ….. if u started this already i will wait .. if not i can do this for this panel … now its easy because i own a shruthi for testing ” title=”Smile” />
let me know ….. just that not 2 people did the same .. this is/was waste of time ” title=”Smile” />
lg widyJanuary 30, 2012 at 4:28 am #3755"Widy75":c0w9y6c5 wrote:hithx for the shruthi editor …..i build mine today…..and it works fine so fare
what about requesting patches from shruthi ….. if u started this already i will wait .. if not i can do this for this panel … now its easy because i own a shruthi for testing ” title=”Smile” />
let me know ….. just that not 2 people did the same .. this is/was waste of time ” title=”Smile” />
lg widy[/quote:c0w9y6c5]No, I have not done this yet. I looked at the files you sent, but I know nothing of programming code. Something I would like to learn, but not at the moment. If you could add it to my panel that would be most awesome!! My guess would be getting rid of the "Panic" button". I only put that there to fill in the space ” title=”Razz” /> Thanks for the help!
January 30, 2012 at 7:30 pm #3756ok than i will do it ” title=”Smile” /> …coming with new version soon … starting now ” title=”Smile” />
February 3, 2012 at 7:32 pm #3757so almost finished with some additional functions , before i upload it to db please download and try it
maybe we will find some bugs ” title=”Smile” />… and i wait for answer from muksys if i should replace the current panel or upload it as a new oneMy config is:
-win7 reaper 32 latest version
-CTRL 5.0.1 revision 925 branch nighly
( i know the panel will NOT WORK with versions bellow 925 because 925 or higher HAS A multithread issue FIX with receiving midi events calling script and update modulators )
-Shruthi SMR-4 FW 0.94 ( i think 095 will also working but there are some parameters missing ” title=”Smile” /> … need to update my synth ” title=”Smile” />Setup:
-i use it as vst in my daw
-with disabled midi in/out device in the DAW
-and selected/enabled midi in/out devices in CTRL
-and selected midi in / out in the panel
-and midi thru enabled in the panel
-and mdi receive from vst enabled in the panel
-!!!!and Shruthi set to Midi out Ctr!!!! … DONT try midi thru on shruthi …..just if u like a midi loop..and endless data exchange ” title=”Smile” />Whats new :
-panic button stop all notes
-new button receive updates the panel with the patch from the synthi
-send a sysex dump to shruthi … sometimes its necessary because shruthi did not react so fast on all events .. and therefore we send a sysexdump
-6 storages to save/recall a patch in the panel
-morph between stored patch 1 – 2 with or without mod matrix included
-on startup i send a sysex for the sound patch and 10 sequencer settings via nprn .. so that all is recovering right
after recalling of a daw project or offline online handling to use more instances in a track (i hope )-color changes … gray is dor sound patch parameters
-black is not included in an sound patch (vol modwheel,sequencersettings)give it a try and report some errors … i will fix it
but for now i need a break …this week was a cool week ” title=”Smile” /> …
received shruthi on fr 16:30 build it until 7 next morning … some sleep .. wakeup test it .. try the editor … fix the editor after >8 hours work every day until 2 in the morning
but if i started once i never give up until i’m finished ” title=”Smile” />February 3, 2012 at 10:57 pm #3758Fantastic group effort. Thanks Widy!
February 5, 2012 at 4:23 pm #3759update to version 1.7
-add option auto request patch on prg change (on/off)
-patch name display and modify with double click
-load save sysex dump to disk with the displayed patch namehad some troubles to upload it on db .. will try it later again
have fun …widyFebruary 5, 2012 at 5:10 pm #3760Widy:
Great! Auto request parameter update with program change is exceptionally awesome! Only thing that is missing is being able to load patches beyond 127. Other than that, better than I had originally set out to accomplish!
I will update the original DDB entry with this version.
February 5, 2012 at 6:38 pm #3761OK, I found some waves missing from slider causing some patches to load with "none" on one of the OSC’s. I have corrected this and updated the DDB. I have also attached the panel.
February 5, 2012 at 11:11 pm #3762Thank you
Will this version work with the DualSVF too ?February 5, 2012 at 11:22 pm #3763snk: when I added the tabs for different filters, did that work for you? Its possible widy was using an version before I added it. I will work on putting that back in.
February 6, 2012 at 1:09 am #3764the filter 2 and reso 2 already exists …resize the panel and move it up to your needs
i hide theme because i could test it ” title=”Smile” />lg widy
February 14, 2012 at 11:11 pm #3765coming soon .. tests are running ” title=”Smile” />
-update to version 2.0
-supports upload of wave tables
– create own wave tables based on
–8 sin osc additive
–band limited saw square tri ( band limitation can be configured on the fly , gibbes factor adjustment )
–load raw pcm format to load any kind of wt
–crossfade between own generated and loaded
–quick preview ( during creation by sending on the fly sysex )-store in slot 0-7 of shruthi
-morph between slots from 0-7
-send all slots to shruthi
-load and save sysex wt’s-wt’s can also (optinal) stored to the sound patch stots 1-6
-wt’s full recover on save load of daw project or offline online in an projectand it looks like:
February 15, 2012 at 5:00 am #3766yeah man, YEAH!!!
February 20, 2012 at 10:28 pm #3767so finaly im done with this ” title=”Smile” />
update to version 2.0
===================
— supports upload of wave tables
— create own wave tables based on
–8 sin osc additive (change source for other frequency ” title=”Smile” />
–band limited saw square tri ( band limitation can be configured on the fly , smooth factor)
–load 2 raw pcm format to load any kind of wt ( load at least all of http://mutable-instruments.net/static/d … eforms.zip )
–mix between own generated and loaded
–quick preview ( during creation by sending on the fly sysex )–store in slot 0-7 of shruthi
–morph between slots from 0-7
–send all slots to shruthi
–load and save sysex wt’s–wt’s can also (optinal) stored to the sound patch stots 1-6
–recover stots 1-6 with or without wt ( could also used for exchanging wt’s in patches )
–wt’s full (optinal) recover on save load of daw project or offline online in an project–also mode switch for smr-4 svf pvk filter board use (renamed it to Shruthi-1 Editor )
–enable disable nprn usecould not update ..im not the creator ” title=”Smile” /> so here is the file
have fun … if a bug exists search for a second one .. every little bug needs a little friend ..no.. report it .. i will fix it ” title=”Smile” />
lg widy -
AuthorPosts
- The forum ‘Panels, Components, Macros’ is closed to new topics and replies.