Forum Replies Created
-
AuthorPosts
-
Hi Atom
Would PNG files by OK..? I’m assuming that you would need alpha transparency :” title=”Question” /> Would you prefer vector or bitmaps :” title=”Question” />
Laters
Hi guys
Just thought I’d chip in here with a list of new CC’s for Little Phatty
[b:31tcu37p][u:31tcu37p]OS 2.0:[/u:31tcu37p][/b:31tcu37p]
Mod Wheel
MSB = 1, LSB = 33Filter Cutoff:
MSB = 19, LSB = 51[b:31tcu37p][u:31tcu37p]OS 2.2:[/u:31tcu37p][/b:31tcu37p]
LFO Sync Source CC 102
LFO Sync Clock Divisions CC 103
Mod Source 5 Select CC 104
Mod Source 6 Select CC 105
Mod Destination 2 CC 106
Pitch Bend Down Amount CC 107
Pitch Bend Up Amount CC 108
Filter Poles CC 109
Filter Velocity Sensitivity CC 110
EG Release On/Off CC 111
EG Legato On/Off/Reset CC 112
Arpeggiator Enable On/Off CC 113
Arpeggiator Clock Rate[b:31tcu37p]**[/b:31tcu37p] CC 4, CC 36
Arpeggiator Clock Source CC 114
Arpeggiator Clock Divisions CC 115
Arp. Range (octaves) CC 116
Arp. Pattern CC 117
Arp. Mode CC 118
Arp. Latch Enable CC 119
Arp. Run/Stop CC 90
Arp Latch/Unlatch CC 91
KB Note Priority CC 88[b:31tcu37p]**[/b:31tcu37p] Arpeggiator Clock Rate is set by CC 4 in increments of 3BPM over a range of 21 – 320 BPM. You can fine adjust this with CC 36 in increments of 0.1 BPM, which is added to the value set by CC 4. So to set any BPM range 21-320, take your target BPM and divide by three. The resulting integer (while number) is your CC4 value. However many "extra" BPM you need to reach your target, multiply this remiander by 10 and this is your CC 36 value.
Example: we want to set the Arp Clock rate to 121.7 BPM.
121.7 / 3 = 40.566…
CC 4 value = 40
LP displays: 120BPB
we need to add 1.7 BPM to get 121.7
1.7 * 10 = 17
CC 36 value = 17
LP displays: 121.7BPM[b:31tcu37p]Reminder: Arpeggiator must be ON and Arp Clock set to Internal in order to show the internal BPM on the LP display.[/b:31tcu37p]
Below are some tables of MIDI CC values corresponding to LP parameter values for the newly-implemented MIDI CCs:
[b:31tcu37p]Mod 2 Destination:[/b:31tcu37p]
0-24 = Off
25 – 49 = Pitch
50 – 74 = Filter
75 – 99 = Wave
100 – 127 = Osc 2[b:31tcu37p]LFO Clock Divisions[/b:31tcu37p]
[i:31tcu37p](same for ARP Clock Divisions)[/i:31tcu37p]0-7 = 1/32
8-15 = 1/32 dot
16-23 = 1/16
24-31 = 1/16 dot
32-39 = 1/8
40-47 = 1/8 dot
48-55 = 1/4
56-63 = 1/4 dot
64-71 = 1/2
72-79 = 1/2 dot
80-87 = Wh
88-95 = Wh + 1/4
96-103 = Wh + 1/2
104-111 = Wh + 1/2 dot
112-127 = Wh + Wh[b:31tcu37p]Gate Modes:[/b:31tcu37p]
0-42: Legato On
43-85: Legato Off
86-127: Legato Reset[b:31tcu37p]Arp Pattern:[/b:31tcu37p]
0-42: Up
45-85: Down
86-127: Order[b:31tcu37p]Arp Mode:[/b:31tcu37p]
0-42: Loop
43-85: Back/forth
86-127: Once[b:31tcu37p]Arp Clock Source:[/b:31tcu37p]
0-42: Internal
43-85: LFO
86-127: MIDI[b:31tcu37p]Arp Octave Range:[/b:31tcu37p]
0-18: -3
19-37: -2
38-56: -1
57-70: 0
71-89: 2
90-108: 2
109-127: 3[b:31tcu37p]Filter Sensitivity:[/b:31tcu37p]
0-11: -8
12-18: -7
19-25: -6
26-32: -5
33-39: -4
40-46: -3
47-53: -2
54-60: -1
61-67: 0
68-74: +1
75-81: +2
82-88: +3
89-95: +4
96-102: +5
103-109: +6
110-116: +7
117-127: +8[b:31tcu37p]Filter Poles:[/b:31tcu37p]
0-31: 1
32-63: 2
64-95: 3
96-127: 4Hi there peeps
I’m more than willing to design an Ableton-esque default template for the CTRL’s if you like…
Laters
Peace, love and flowers…
Hi Atom
Top work there! I will happily test:
[list:ah7o5j7n]Moog Little Phatty
Moog Voyager[/list:u:ah7o5j7n]..once released on OS X. I can also provide you with Midi Specifications for DSI Prophet ’08 if your interested..?
One final thought do you have any plans to implement NRPN’s for Little Phatty filter control, also there are a lot of additions to the LP Midi Spec for OS 2.2. which I can provide you with should you be interested.
Take care
Peace, love and flowers
A Cat Called Anarchy
-
AuthorPosts