Yamaha TX7 v1.01 panel

Proud to present the TX7 panel as a result of successful co-operation with forum member pascalc, who has done the Lua programming!

Some notes on this panel.

  • make sure you have made the right MIDI IN and MIDI OUT connections before you start working with the panel. Both connections are required to interact with the synthesizer;
  • before you can send a bank or an individual voice to the TX7 you need to disable the memory protection on the device. You can achieve this by clicking on the button ‘disable memory protect’;
  • to change the name of a voice, double click on the name displayed in the LCD-screen (below right) of the panel;
  • if you like this panel so much you wonder how to express your gratitude, please donate to CTRLR.org so Roman Kubiak (aka atom) can finally buy a proper Macintosh computer ;-)!

This panel was developed using CTRLR version 5.3.122, build date June 17 2015, Juce 3.1.1, libusb 1.0.19

Download

number of downloads: 2,066

Yamaha TX7 (beta)

IMPORTANT!

On January 21, 2016 I have published a new version of this panel (and also another one compatible with a DX7), so you better download that one!

I will keep the Yamaha TX7 (beta) panel available for a while, until the new version works as expected. But then I will delete it.

———————————————————————————————————————————————–

This is a beta release of a patch editor for the Yamaha TX7 sound module, the companion of the Yamaha DX7.

Basically all parameters of a preset are present in this editor, but there are still a few midi capabilities of this device left that need to be implemented. A few remarks ( and probably I will forget some) on why this is a beta release still:

  • Saving of a preset not (yet) possible. I’m afraid presets need to be stored in (and loaded from) a separate file on the computer. Have to figure out how to do this in Lua (with somebodies help?);
  • When clicking for the second time on the “get perf.” button (with the same voice present) the values of the wheel -, foot -, aftertouch – and breath sensitivity change again, probably back to some default value. I don’t know why this happens;
  • Still unclear to me how to get the right on/off setting of the modulation section (wheel – , foot – , aftertouch – and breath control buttons) when they receive their assigned parameter value;
  • The layout of the panel needs some more work.

So please use this panel freely and send me your comments or Lua-scripts so I (or we…) can improve this panel!

Download 2,056
Do NOT follow this link or you will be banned from the site!