Forum Replies Created
-
AuthorPosts
-
hi no problem at all ” title=”Smile” />
version 2.1
smale update
– prg change now working also with user bank
– auto dump request if u change it on shruthi ( enable auto request + enable prg change )
– init patch to default
– bugfix on storage handling i sended the wt twice on recover (sry)lg widy
so finaly im done with this ” title=”Smile” />
update to version 2.0
===================
— supports upload of wave tables
— create own wave tables based on
–8 sin osc additive (change source for other frequency ” title=”Smile” />
–band limited saw square tri ( band limitation can be configured on the fly , smooth factor)
–load 2 raw pcm format to load any kind of wt ( load at least all of http://mutable-instruments.net/static/d … eforms.zip )
–mix between own generated and loaded
–quick preview ( during creation by sending on the fly sysex )–store in slot 0-7 of shruthi
–morph between slots from 0-7
–send all slots to shruthi
–load and save sysex wt’s–wt’s can also (optinal) stored to the sound patch stots 1-6
–recover stots 1-6 with or without wt ( could also used for exchanging wt’s in patches )
–wt’s full (optinal) recover on save load of daw project or offline online in an project–also mode switch for smr-4 svf pvk filter board use (renamed it to Shruthi-1 Editor )
–enable disable nprn usecould not update ..im not the creator ” title=”Smile” /> so here is the file
have fun … if a bug exists search for a second one .. every little bug needs a little friend ..no.. report it .. i will fix it ” title=”Smile” />
lg widyjo feel free to pm me .. i have alwayse time ” title=”Smile” /> .
but i did a short look at the super nova manual … and it will be a hard work ..so many parametercoming soon .. tests are running ” title=”Smile” />
-update to version 2.0
-supports upload of wave tables
– create own wave tables based on
–8 sin osc additive
–band limited saw square tri ( band limitation can be configured on the fly , gibbes factor adjustment )
–load raw pcm format to load any kind of wt
–crossfade between own generated and loaded
–quick preview ( during creation by sending on the fly sysex )-store in slot 0-7 of shruthi
-morph between slots from 0-7
-send all slots to shruthi
-load and save sysex wt’s-wt’s can also (optinal) stored to the sound patch stots 1-6
-wt’s full recover on save load of daw project or offline online in an projectand it looks like:
for shure the a station did not work for the supernova
should only be a start point for the supernova 2 …so the moste parameters are on the gui
-just add the missing from the supernova
-edit all parameters and devine the right nprn or cc
-edit just the mod definition list in source to sysex exchange …. the rest of the source should work out of the box without changingif u need help and u have skype u can contact me …. i can show it for one parameter .. the rest is alwayse the same
lg widyquick reply as alwayse ” title=”Smile” /> yeah
throws some errors ” title=”Wink” /> … always crash in vst mode … buts ok without vst i can open the edit mode to see the code
all i need is there ” title=”Smile” /> …….. i will see what i need ( just a view things) and if its workingthx a lote widy
yeh i know … i saw the wave component and its also possible to readout the file
but i did not have a tool to create single cycle wave in the format 127×129 forms …
and it just for fun stuff to draw single cycle wave form by hand and upload it to a synth (shruthi) .. if not sounds good .. draw a new one and upload it …as simple as possiblei only want to know if it is possible ….if not .. it dosent matter ..if yes i will find it out ” title=”Smile” />
lg widy
the filter 2 and reso 2 already exists …resize the panel and move it up to your needs
i hide theme because i could test it ” title=”Smile” />lg widy
update to version 1.7
-add option auto request patch on prg change (on/off)
-patch name display and modify with double click
-load save sysex dump to disk with the displayed patch namehad some troubles to upload it on db .. will try it later again
have fun …widydo it by your self… u can take the a-station as start point ” title=”Smile” />
play one day with the ctrlr edit mode and investigate 2-3 days for the panel ….and your dream comes true ” title=”Smile” />so almost finished with some additional functions , before i upload it to db please download and try it
maybe we will find some bugs ” title=”Smile” />… and i wait for answer from muksys if i should replace the current panel or upload it as a new oneMy config is:
-win7 reaper 32 latest version
-CTRL 5.0.1 revision 925 branch nighly
( i know the panel will NOT WORK with versions bellow 925 because 925 or higher HAS A multithread issue FIX with receiving midi events calling script and update modulators )
-Shruthi SMR-4 FW 0.94 ( i think 095 will also working but there are some parameters missing ” title=”Smile” /> … need to update my synth ” title=”Smile” />Setup:
-i use it as vst in my daw
-with disabled midi in/out device in the DAW
-and selected/enabled midi in/out devices in CTRL
-and selected midi in / out in the panel
-and midi thru enabled in the panel
-and mdi receive from vst enabled in the panel
-!!!!and Shruthi set to Midi out Ctr!!!! … DONT try midi thru on shruthi …..just if u like a midi loop..and endless data exchange ” title=”Smile” />Whats new :
-panic button stop all notes
-new button receive updates the panel with the patch from the synthi
-send a sysex dump to shruthi … sometimes its necessary because shruthi did not react so fast on all events .. and therefore we send a sysexdump
-6 storages to save/recall a patch in the panel
-morph between stored patch 1 – 2 with or without mod matrix included
-on startup i send a sysex for the sound patch and 10 sequencer settings via nprn .. so that all is recovering right
after recalling of a daw project or offline online handling to use more instances in a track (i hope )-color changes … gray is dor sound patch parameters
-black is not included in an sound patch (vol modwheel,sequencersettings)give it a try and report some errors … i will fix it
but for now i need a break …this week was a cool week ” title=”Smile” /> …
received shruthi on fr 16:30 build it until 7 next morning … some sleep .. wakeup test it .. try the editor … fix the editor after >8 hours work every day until 2 in the morning
but if i started once i never give up until i’m finished ” title=”Smile” />ok thx for the info
i solved first problem for now … i just disable the auto send on startup .. and send all modulators in an lua script with a delay in between
the delay is just a simple for i = 0 ; 10000 ….. i want use os cammands or so on …i do this just for 10 parameters ..and for this parameters i don’t have a sysex defintion ” title=”Smile” /> ….
my sweep nice shruthi did not provide sysex defintions for sequencer settings .. only for the sequence itself ” title=”Smile” />however .. if i solve also the the last problem … displaying the name …i will try this at night …. ctrlr has a new nice shruthi panel ” title=”Smile” /> with full parameter exchange in both directions
(panel is the same as the existing one but with new features )lg widy
what is a good free video capter program .. i can do some videos of using ctrlr in a daw
ok than i will do it ” title=”Smile” /> …coming with new version soon … starting now ” title=”Smile” />
hi
thx for the shruthi editor …..i build mine today…..and it works fine so fare
what about requesting patches from shruthi ….. if u started this already i will wait .. if not i can do this for this panel … now its easy because i own a shruthi for testing ” title=”Smile” />
let me know ….. just that not 2 people did the same .. this is/was waste of time ” title=”Smile” />
lg widy925 seems very improved on stability … i had no more crashes during 3 days of using ctrlr as vst extensively
the only crash i got was the crashes of my novation a – station ” title=”Smile” />
ctrlr is a cool tool to overload some old synths with sysex / cc dumps ” title=”Smile” /> .. and sometimes old synths gives up and crash .. but holy shit sometimes thy produce so confused sounds …. like a ghost in my synths ” title=”Smile” /> .. i like it ” title=”Smile” />lg widy
update to 1.9 on db need 925
with sounddump storage and morph option ” title=”Smile” />update to 1.8
-add all arp patterns from the latest os 0-63.. i missed this because my manual was to old
-add a 6xstorage to save/recall sound dumps
-add a morph slider to morph between sounddump ( between storage1-2)
its not for realtime (mybe my code is not so fast .. i need to switch to index based programming instead of string searching all the time, but it was the first tryout) , its for finding new sounds and therefore it works perfect…usecase
select any patch on synth or panel
press request sound dump that ctrlr panel is up to date (select patch didnt request the dump, because i will tryout more patches on the synth before syncing with the panel .. its faster)
press store1
select another patch on synth or panel
press request sound dump that ctrlr panel is up to date
press store2
if one nice sound was found u can store it to 3-6 for recalling on recording
thats my workflow .yellow … current panel state is stored to memx
wihte —-memx cleard .. not realy .. but its marked as not stored
green…. current active recall / or morph is active
store1 + store2 set morph state to enablehave fun widy
wow yeah ” title=”Smile” />
seems to work ….both bugs are fixed ….. no more crashes here
thx lg widy ” title=”Smile” /> -
AuthorPosts