While opening a company file, you might have faced the QuickBooks error 6000 83. This issue is usually displayed in the -6000, XXXX format where the last four digits could be anything, based on the root cause. Whatever may be the cause, when this error shows up, your company file will not open until it is resolved.
The causes leading to the -6000 problem are quite varied. They range from an interfering Firewall and corrupted (.TLG) files to incorrect internet setups or file mismatch. These specific causes lead to separate codes for each one so that we can differentiate between them easily.
Mentioned below are the chief reasons behind the -6000 series of errors. If you have encountered error code 6000 83, keep reading this blog to learn of some solutions through which you can fix this problem. If not, then you can go through other blogs in which we have covered many issues like the QuickBooks error 6000 77.
Main Reasons for QuickBooks error 6000 83
The following are some of the ways in which you may end up with the -6000 series errors-
- A firewall is disrupting the connection or port 8019 is hindered
- The.TLG file or QuickBooks installation is corrupted
- A non-server computer is hosting the company file
- QB Database Server Manager is malfunctioning
- .ND file is working improperly or has the wrong path to your company file
- Incorrect network setup in QuickBooks or it could be that the company file is damaged
- The Windows account being used is damaged
When you know the main reason behind the error in your computer, you can proceed towards solving it on your own. It is not difficult to fix once you know what’s causing it but we recommend two main steps before you move forward –
- That you make sure your QB software is updated to the latest version. This prevents most of the problems from taking place.
- If you install the QuickBooks File Doctor and run it – you might get your problem resolved beforehand and save a lot of time.
Based on what caused the particular trouble in your system, you can go ahead and perform the following solutions to solve it.
Related Post: QuickBooks Error 1402
Solutions to QuickBooks error 6000 83
Different causes of the problem mean different ways in which you can solve it. Here are some of the easiest solutions for it –
Solution 1: Replace the names of the.ND and.TLG files
The.ND and.TLG are configuration files that permit QuickBooks access to a company file. Any damage to these will result in the error message showing up. You can fix these files by renaming them using the following steps –
- Click and open the location folder for your company file.
- Find the files with the extensions .ND and .TLG and the same name as your company files.
- Rename and add the word OLD at the end of all of them, such as company_file.qbw.nd.OLD
- Try signing in to your company file again. If the issue persists, try the next solution.
Solution 2: Try opening a sample company file
This solution is to test whether the problem exists in the company file or the software itself. If your file opens, then you can move over to the next solution. However, if it doesn’t, then you have found the real problem behind QuickBooks error code 6000 83- damaged installation files. You shall have to repair those corrupted files.
Solution 3: Paste a copy of the QuickBooks file
This solution is to check whether the location of the file is causing trouble. All you have to do is copy it and paste it right on the desktop. If the location is, in fact, the problem, then clicking on it will open it normally. If not, then the file itself is most likely to be corrupted – you will have to fix it. You will now have to opt for the next solution and try restoring a backup.
Solution 4: Restore a backup of the company file
These are the steps in case you try to restore a backup of your company file but face trouble-
- Check the path length of your company file – it should be within the range of 210 characters.
- Determine whether your computer is hosting by opening the company file.
- Once you have made these changes, you can retry the restoration of your company file.
Solution 5: Shutdown each and every QuickBooks process
- Use the Administrator account for this one particular solution to QuickBooks error code 6000 83.
- Once you are logged in, open the task manager by using the shortcut key combination – Ctrl+Shift+Escape.
- Open the Processes section by clicking on the Users tab.
- Select all of the QuickBooks processes and click the End Task button.
- Proceed to open the multi-user mode and then your company file.
In that case, if the QuickBooks Error 6000 83 is not solved, perhaps it may be time to consult experts like our ProAdvisors via chat or you can call at 1.800.579.0391. We can go through all the steps and solutions faster for a more convenient and better resolution of your QB-related issues.
Related Post: QuickBooks Error 6147