There are occasions that your Canon printer isn’t turning on. This issue is quite common with printers and usually solved by the user after performing a factory reset Canon printer. To solve the issue with this issue with a Canon printer that will not turn on, you have to find the cause. Sometimes, the cause could be as simple as the Power cord not being connected correctly to the printer, or the Power Outlet isn’t working. Therefore, before you leap to any conclusion, and then start thinking there’s something seriously wrong with your printer, you should look over these simple items. If, after having checked all these points and still you are unable to resolve the problem, you should try the basic troubleshooting techniques mentioned in this article.
The likelihood of the issue persisting after completing the basics of troubleshooting is not very likely but in the event that it does occur you should not be afraid of reaching out to our experts.
Why Does My Canon Printer Won’t Turn On
Before you reach any conclusion and then begin the troubleshooting procedures It is beneficial in figuring the reason why your Canon printer not turning on the issue. Below are the causes that could cause your Canon printer not to start.
- The printer you are using is not connecting to the source of power correctly.
- Your printer isn’t getting enough power.
- The printer configuration is incorrect
- Problem with printer’s adapter
- Power cord damaged
There could be a variety of causes that could cause this Canon Printer won’t turn on issue. If you want to eliminate the issue, you can continue using the troubleshooting techniques described in the following article.
Steps to Fix Canon Printer Won’t Print Problem
Try each troubleshooting procedure one at a time until the printer will not switch on is fixed.
Verify that your Canon printer is on
Sometimes, if pressing the power button in a way that is too tight or when the button is held for more than a couple of seconds, the software for printing could stop the printer from switching on. The printer may not be able to turn on if your doors to access the printer are opened.
If that is the case, then disconnect all cables connected to your printer and then leave it as is for a few minutes. After about a minute, connect the cords and cables into the printer, and then turn the machine on. This will reset your printer’s machine and resolve any issue that may arise temporarily.
In certain printers, you can have a power button close to either the power cable or the control panel.
Look up the power codes
The power cord is the one responsible for connecting the printer’s main power source. If it isn’t connected, the printer will not have enough energy to operate and, consequently, you won’t have the ability to print anything. In this situation, you should verify the power cord. Check that it’s properly connected to the printer and with the power switch. Check to ensure that it isn’t damaged and functioning correctly. The power cord is damaged rarely, but it does happen, so it is important to test it. If it’s not functioning, take it to a repair shop immediately.
Verify that the configuration of your power source is correct.
The configuration of a printer is different based on the model or type of printer. Some printers are equipped with power cords that aren’t able to be removed, others have removable power cords that are easy to remove. Certain printers require an AC adapter to connect to the power outlet on the wall, while others do not.
Check the printer adapter
The last but not least, the printer adapter could cause a Canon printer not printing issues. Canon printers have two kinds of adaptors, one is an external AC adapter and an AC adapter built-in. If the printer has an integrated AC adapter the power cord may not be easily removed. Simply plug the power cord into the outlet on the wall in order to start the printer. If this doesn’t bring your printer to life, you need to examine the code for wear and wear and tear. If there is no solution, attempt replacing your power cable using a different and test if that is working. A similar procedure is applicable for an external AC adapter, and check if it works.
After you’ve attempted all of the above strategies, you will need to restart your printer to check whether it’s printing correctly.
Conclusion
We hope that after using the steps above, you’ll be able to solve your Canon printer issue which isn’t working. If you’re not able to turn on your printer or encounter any other issues, take a look at contact our Tech Support experts for further assistance
Also Read: Perfect Solutions to Fix Avast Antivirus Not Opening Issue