This MIDI Editor allows you to control all parameters of the MeeBlip Triode, including some “hidden” parameter which is not available on the synth panel.
Plugin versions allows automation/recording of the different parameters
Basic panel with all the features supported with Airbase99 firmware 1.15.
Airbase99 settings for full funtionality:
Under MIDI Menu (Master Menu parameter PLAY must be off to access MIDI menu):
setting: SnpSh ON (send program dump on startup and programchange events)
setting: TxCtr ON (send controller values when changing values on device)
Restrictions:
Bank changes do not change the program, a program change needs to be executed with a bank change.(since fw 1.15)
To select the Kits # 128-255 in Bank 000 – 003, send the bank select in advance by using the values 1, 3,
5 or 7. These uneven controller values address memory slots 128 – 255 of the desired bank. The values 0, 2, 4 and 6 correspond to the lower half of the specific bank.
An example: Bank 000 Kit 200 is selected by using Bank Select = 1 and Prog Change = 73 (200 – 127 = 73)
When changing a program a programdump with all the controller values is sent to the panel. But the following controls are not sent and therefore not updated:
-for handclap, rimshot,crash, ride, hihat: the sample selection.
-for hihat: the source selection.
These controls are not in sync with your device after a program change.
Button “Save on device” just sends the store cc (CC=62 value=64) value to the Airbase99.
Here is Novation X-Station voice editor / librarian.
What can it do:
Send / receive almost all the parameters via SysEx / MIDI CC messages
Save / Load MIDI Bulk SysEx dump files to / from X-Station
Save / Load single programs as *.syx files
Receiving MIDI bulk dumps directly from device
This panel have some limitations – for example after “offline” parameters edited, entire patch data is sending via sysex because X-Station not able to control these parameters in realtime.
Current version: 0.4.3 from 14.10.2019
Hope controlling your X-Station with this panel will be fun!
The panel is a pure patch mapper as the Dreadbox Nyx V2 does not support the load/save of programs or the manipulation of its program parameters by Midi NRPN/CC/Sysex messages.
It will support you in saving and retrieving Nyx V2 patches on your PC but gives you also the possibility to exchange them with other users as they are stored as sysex files.
Features:
Dreadbox Nyx V2 interface with similar way of working as actual synthesizer.
Top row of support “screens” with old look
Visual feedback by using “LED” ring buttons and indication of the value (on change or on click)
Envelopes graphs handled by mouse or sliders
Load / Save programs from individual .syx files
Easy program renaming
Display and export of program parameters as text file
Ability to describe 9 input/output colored patch cables with different sources/destinations
Programs have a name, author, save date and description. They can be associated to a category
Browser of the files on the disk
Patch sheet tab with patch sheet for Nyx V2 and other gear (external synths/sequencers)
Automatic reading of wav files associated to a patch
Send / receive almost all the parameters via SysEx / MIDI CC messages
Manipulate Free EG values
Save / Load MIDI Bulk SysEx dump files to / from AN200
Save / Load single programs as *.syx files
JayB patch bank embed by default (http://jaybmusic.net)
Receiving MIDI bulk dumps directly from device
To make AN200 tweaking more enjoyable – that’s what this panel is created for!
Theoretically, this panel is also compatible with the PLG150-AN card, but it has not been tested, so that’s not sure.
Thanks to the guys Possemo, dnaldoog and goodweather for the tips and tricks!
PS: since this panel is oriented only on a synth part of the device, there are no controls related to the stepsequencer / drum parts.
PPS: it’s still beta, so errors are possible. Please, leave a comment if you are experiencing any problems.
Future plans:
Code stabilization
Improve AN1X compatibility
Click to expand changelog
Changes v 0.6
Applied dnaldoog”s workaround, fixing startup alert and popup windows odd behaviour
Receiving MIDI bulk dumps directly from device now possible
After receiving bulk dump you can either save it directly to HDD or load data into panel
Settings menu implemented:
Added “Send panel data after loading” option
Added “Portamento mode” controller
Support processing AN1X Edit “MidiEx” bulk dumps
Fixed bug in exported VST version, which causes wrong preset name after loading state
Fixed Freehand tool right-to-left drawing – there was some inaccuracies which causes broken lines
Some minor fixes and slight code review
Changes v 0.7:
Changed true/false to 1/0 values for “panel loaded” variables
Save single program to disk writes current panel state data into preset instead of original preset data
Changed some bytes in a sysex formulas – sometimes device ID was “11”, sometimes “10”
Added new option – “Send panel data after preset changed” (it was always set to “ON” before)
Setting some parameters as not exported to VST host since there is no reason to automate them
Changes v 0.8
New style controls
Removed FreeEG Keytracking knob because it is not used anywhere
Adjusted some parameters to fit ImageSlider requirements (hope there was nothing broken during this process…)
Current version: 0.9 from 22.09.2019
Latest changes:
Rewritten bulk dump processing procedure – now it can directly process *.AN2 files
AN1X (very limited) experimental support – controls was transferred from experimental panel
Fixed some value inconsistencies
Before you start: this panel using extended instructions set, so you need to turn on extended midi control change mode on your device.
Note for AN1X users: to show available AN1X controls, go to Settings -> Set AN1X compatibility mode, then Settings -> Show AN1X-specific controls.
P. S.: since I had to sell my AN200, further development is halted.